Top 9 40Mm Cooling Fan Heatsink

Package include: 1 Piece fan and mounting screws & nuts
Size:40x40x10mm
Rated Voltage:12V
Rated Current: 0.06A
Connecter: 3Pin
Power: 0.7W
Speed: 4500RPM
Air flow: 4.95CFM
Noise:24dBA
Bearing type: Sleeve Bearing
Cable Length: 25cm Or 10 inches
Life: 35000 hours
Weight:16g/pcs or 0.55oz

2pcs Raspberry Pi DC Brushless Cooling Fan Heatsink Cooler Radiator Connector Separating One-to-Two Interface 3.3V 5V for Raspberry Pi 2/ Pi 3/3B+ and Pi Zero/Zero W

Features:
This Pi fan not only support Raspberry Pi 2/ Pi 3/3B+ and Pi Zero/Zero W, but compatible with other development board.
Its connector is separating, One-to-Two interface, can choose 3.3V or 5V.
Rated voltage: DC5V
Working voltage: 3.0-5.8V
Current: 0.18A
Air volume: 5 m³ / h
Number of revolutions: 13200RPM
Noise: 18 dB

Package Including
2 * pi fan
8 * nuts M2.5
8 * screw M2.5 * 14mm

This helps to prevent the heat from the nozzle traveling too far upwards.
Without this fan, the filament could get soft above the heater block, which leads to extrusion issues and degradation of print quality.
This is a DC 12V 0.08A cooling fan.
Dimensions are 40mm x 40mm x 10 mm.
Sufficient for use in 3D printing, operating speed is 6000 RPM.
Equipped to properly cool your 3D printer’s extruder assembly, this extruder fan is compatible with the MakerBot Replicator 2 and MakerBot Replicator 2X.
Also compatible with Flashforge, CTC, and other 3D printer types.

Specification:

Rated Voltage: DC 12V

Consuming Current: 0.08A

Connector: 2pin-ph2.5

Speed: 6000 + -10% RPM

Air Flow: 6.5 CFM

Static Pressure: 2.9

Noise Level: 27dBA

Note: Any questions, you can contact us and we will give you a satisfied solution!

Notice!!!

4pcs 3D Printer Fan 12V 0.08A DC Mini Quiet Cooling Fan 40X40X10mm with 28cm Cable for 3D Printer, DVR,and Other Small Appliances Series Repair Replacement

Description:
Size: 40 mm x 40 mm x 10 mm;
Working Voltage: DC 12V;
Working Current: 0.08A;
Air Flow: 5.75±10% CFM;
Power: 0.96w;
Cable length: 280mm;
Certification: CE,UL,CUL;

Feature:
Oil bearing 30000 hours;Double roller bearing 50000 hours.
Temperature of usage environment: -10℃ to +70℃;
Bearing is high precision, long life and low noise

Package Including:
4 * DC 12V 0.08A 40X40X10mm 3D Printing Fan

Can be applied for passive cooling of 3D printers, NEMA 17, TEC1-12706 Thermoelectric Peltier Cooler, VRM, MOSFET, Regulators, VRAM, IC Chips, Stepper Motor Drivers, Miners, etc.

Specifications:
Material: Anodized Aluminum.
Size: 40 x 40 x 11mm (L*W*H)
Package includes: 20 pieces heatsink.

Note:

Some scratches may be caused in the production process.

Dimension: 40*40*10mm
Housing: Black PBT (UL94V-0)
Fan Blade: 7 Blades, Black PBT (UL94V-0)
Bearing System: Two Ball Bearings
Net Weight: 13.7g

Rated Voltage: 12V DC
Operating Voltage Range: 10.8-13.2V DC
Start-up Voltage: 6.0V DC
Rated Current: 0.04A (0.10A Max.)
Rated Power: 0.48W (1.2W Max.)

Rated Speed: 6200PRM
Air Flow: 7.56CFM
Air Pressure: 3.19mmH2O
*Noise Level: 27.50dB(A)
Lift Expectancy: 50000H at 25degree test

*Acoustical Noise Testing Condition: Fan is hanged in anechoic chamber, noise is measured at rated voltage in anechoic chamber with microphone at a distance of 1 meter formthe air intake.

Descriptions:
This is 4010 type fan for Raspberry Pi or other development board.
When the fan turns up, you will see Blue light
It’s high quality and low consumption and low noise.
Used for used for Raspberry Pi 4,Pi 3, Pi 2, Pi Model B+.
The DC 5V cooling fan run smoothly and quietly
It’s good for heat dissipation of Raspberry Pi.
It can be assembled easily by screws.

Features:
4010 Fan
High quality
Low consumption
Super quiet
Easy to setup

How to connect:
Connect to 5V and GND on GPIO Pins
PS: You can also move the red wire to 3V3 pin to reduce the speed of the fan.

Package Includes:
4x Cooling Fan
4x Screw Set

NOTE:
Raspberry Pi Not Included

Feature
Voltage:5V
2Wire 2Pin

Package:
1 * DaHua DVR HDCVI Camera Fan