
Finding your suitable readers for beer cooling coils is not easy. You may need consider between hundred or thousand products from many store. In this article, we make a short list of the best readers for beer cooling coils including detail information and customer reviews. Let’s find out which is your favorite one.
744 reviews analysed
1. COLDBREAK 12.5′ Wort Chiller, 3/8", 100% Pure USA Copper, 8′ Vinyl Tubing, Heavy-Duty Garden Hose Fitting, Homebrewing
Feature
- 12. 5-foot kitchen copper worth chiller. Designed for 2-3 gallon batches (brewing kits)
- Made in Michigan with 100% pure 3/8-inch OD USA Copper tubing
- 8 feet of vinyl tubing – (2) 4-foot lengths
- Strong stainless steel hose clamps
- Heavy-duty lead free female garden hose fitting (USA made)
- 6. 75-Inch coil diameter 3-inch coil height 13. 5-Inch inlet/outlet height
- TEST BEFORE USE (EVERY TIME) – Hose clamps need to be checked for leaks before each use. Tightening the hose clamps while the vinyl tubing is warm will create a tight, leak free seal.
2. COLDBREAK 25′ Wort Chiller, 3/8", 100% Pure USA Copper, 4′ Vinyl Tubing, Heavy-Duty Garden Hose Fitting
Feature
- Premium 25-foot chiller made with 3/8-inch OD USA Copper tubing
- 2×4-foot lengths of 3/8-inch vinyl tubing
- Strong stainless steel hose clamps. Hose clamps need to be checked for leaks before each use. Tightening the hose clamps while the vinyl tubing is warm will create a tight, leak free seal.
- Heavy-duty lead free female garden hose fitting (USA made)
- 6. 75-Inch coil diameter 5. 5-inch coil height 14-Inch inlet/outlet height
- Made in the USA
3. Inkbird ITC-1000 Dual Stage Digital Temperature Controller Fahrenheit & Celsius Thermostat with Sensor for 3D Printer,Freezer,Fridge,Hatching ect (110 Volt)
Description
Fahrenheit and Celsius Display Can Be Choose
Temperature Calibrating, Refrigerating control output delay protection
Control the Temperature by Setting the Temperature Set Value and the Difference Value
Alarm When Temperature Exceeds the Limit or When Sensor Error
2 Relays, Switch Between Cooling and Heating Modes
Technical Parameter:
Output: 2 Relays
Temperature Measuring Range: -50~210 oF / -50 oC-99 oC
Resolution: 0.1 oF / 0.1 oC
Accuracy: ±1 oF(-50 oF -160 oF)/ ±1 oC(-50 oC -70 oC) Power Supply: 110VAC 50Hz/60Hz
Power Consumption: 3W
Sensor: NTC Sensor
Relay Contact Capacity: Cooling (10A/250VAC)/ Heating (10A/250VAC);
Ambient Temperature: 0 oC-60 oC
Storage Temperature: -30 oC-75 oC
Relative Humidity: 20-85% (No Condensate)
Package Content:
1x Temperature controller ITC 1000 110V
1x 7.87″ SENSOR
1x Muanal
4. Inkbird ITC-308 Max.1200W Heater, Cool Device Temperature Controller, Carboy, Homebrew, Fermenter, Greenhouse Terrarium Temp. Control
Feature
- [Convenient Design] Plug and play design, easy to use. Support °C/°F display.
- [Dual Relay Output] Be able to connect with refrigeration and heating equipment at the same time.
- [Dual Display Window] Be able to display measured temperature and set temperature at the same time.
- [Buzzer Alarm] High and low temperature alarms are available when the temperature is over or the sensor is with issue.
- [Warranty & Safe] Warranty: 1 year. Maximum output load: 1100W(110V). It is with temperature calibration and compressor delay which can protect your refrigeration.
Description
Specification:
Temperature Control Range: -50~99°C / -58~210°F
Temperature Resolution: 0.1°C / 0.1°F Temperature Accuracy: ±1°C (-50~70°C) / ±1°F (-50~160°F)
Temperature Control Mode :On/Off Control, Heating and Cooling
Input Power: 100 ~240VAC, 50Hz/60Hz
Temperature Control Output: Max. 10A, 100V~240V AC
Buzzer Alarm: High and Low Temperature Alarm
Sensor Type: NTC sensor (Including)
Sensor Length: 2m / 6.56ft
Input Power Cable Length: 1.5m (5ft)
Output Power Cable Length: 30cm (1ft)
Body Dimension: 140x68x33mm (5.5×2.7×1.3inch)
Socket Dimension: 85x42x24mm (3.3×1.7x1inch)
Ambient Temperature: -30~75°C / -22~167°F
Storage Temperature: -20~60°C / -4~140°F
Humidity: 20~85% (No Condensate)
Warranty: 1 Year
Package Included:
1x ITC-308 Temperature Controller
1x Manual
5. WOW Apple Cider Vinegar Shampoo & Hair Conditioner Set – (2 x 16.9 Fl Oz / 500mL) – Increase Gloss, Hydration, Shine – Reduce Itchy Scalp, Dandruff & Frizz – No Parabens or Sulfates – All Hair Types
Feature
- REPAIR DAMAGED HAIR: WOW shampoo and conditioner set uses virgin coconut and avocado oil to rejuvenate weak, thin, or damaged hair or dry scalp. The formulation of both oils replenish lost nutrition that’s vital in keeping strong, smooth hair.
- CLARIFYING, HEALTHY HAIR: Detoxify your hair and dry scalp to clear the buildups caused by dirt, filth, and style products. Apple cider vinegar removes toxin that damages hair. Rich super antioxidant protection supports healthier hair growth for men and women.
- 100% MONEY BACK GUARANTEE – Our WOW hair products come with a risk-free money back, no questions asked, refund policy. Our hair treatment shampoo is backed up by our money back guarantee to ensure our customers’ complete satisfaction!
- MAXIMIZE HAIR STRENGTH: Improve your hair-cleansing routine by using both to get the best long-lasting results. Enriched with keratin proteins, fatty acids, vitamins B5 &
- E, and saw palmetto extract to help strengthen hair. Protect against pure psoriasis.
- ALL NATURAL INGREDIENTS: WOW uses vegan ingredients free from damaging or harmful chemicals. Clarifying shampoo &
- conditioner is hypoallergenic, leaving hair moisturized &
- soft. Less prone to eczema, breakage, split ends, and thinning hair. Cruelty Free.
6. Inkbird ITC-308 Digital Temperature Controller Outletsmoker Thermostat, 2-Stage, 1100W, with Sensor Reptile Beer Brewing Kegs Fridge Cured Meat Breeding
Feature
- Plug and play design, easy to use
- Dual relay output, be able to connect with refrigeration and heating equipment at the same time
- Support reading with Centigrade or Fahrenheit unit
- Maximum output load: 1100W(110V)
- Dual display window, be able to display measured temperature and set temperature at the same time
7. Inkbird Pre-Wired Digital Dual Stage Temperature Controller Outlet Thermostats 110V 1000W With 12" Stainless Probe Sensor DC Cord for Fermentation Kegerator ect
Feature
- 12inch Stainless Probe with 6.5ft DC cord
- Temperature calibration
- Dual relay output, be able to connect with refrigeration and heating equipment at the same time
- Heating/Cooling differential function could be set separately for refrigeration and heating to protect temperature controller from violent change.
- Support reading with Centigrade or Fahrenheit unit
Description
Features:
This temperature probe can be submersed into beer direclty during fermentation.
No need to worry about inserting a smaller probe into a separate thermowell temperature probe.
It’s compatible with INKBIRD’s following controllers:ITC-308,ITC-306T,ITC-310T.
Plug and play design,easy to use;
Dual relay output,be able to connect with refrigeration and heating equipment at the same time;
Support reading with Centigrade or Fahrenheit unit;
Maximum output load:1100W(110V);
Dual display window,be able to display measured temperature and set temperature at the same time;
Compressor delay protection for refrigeration control
High and low temperature alarms are available;
Specification
Temperature Control Range:-50~99°C/-58~210 °F
Temperature Resolution:0.1°C/0.1°F
Temperature Accuracy:±1°C(-50~70°C)/±1°F(-50~160°F)
Temperature Control Mode:On/Off Control,Heating and Cooling
Input Power:100~240VAC,50Hz/60Hz
Temperature Control Output:Max.10A,100V ~240VAC
Dimension Body:140x68x33mm(5.5×2.7×1.3inch)
Socket:85x42x24mm(3.3×1.7x1inch)
Input Power Cable Length:1.5m(5ft)
Output Power Cable Length:30cm(1ft)
Buzzer Alarm: High and Low Temperature Alarm
Over-temperature and sensor fault alarm
Ambient Temperature:-30~75°C/-22~167°F
Storage Temperature:-20~60°C
Measuring temperature range:-50℃~120℃
Sensor Type: NTC
Probe Material:Stainless steel
Probe Dimensions:6mmx300mm(0.24in x 12in)
Cord Length (excluding probe):2m (6.5ft)
Package Content:
1xITC308S temperature controller;
1xStainless Steel Probe DC Sensor
1xManual
8. Johnson Controls A421ABG-02C A421 Series Electronic Temperature Control with Pre Wired Power Cord, -40 to 212 Degree F Temperature Range
Feature
- Electronic Single Stage Temperature Control, 120/240 VAC, UL TYPE 1, IP20, SPDT, with 12 amp power c
- Featuresa lockable front-panel touchpad for setup and adjustment, and a Liquid Crystal Display (LCD)
- Replaces the popular A419 Johnson Control model with upgraded technology.
- The A421 controls provide heating or cooling control, sensor offset, temperature setback, adjustable
- In stock – Ships FAST!
Description
The Johnson Control’s A421 digital temperature controller is great for the brewers kegerator or keezer. You can use this to keep your beer or wine at exactly the temperature you like it. Excellent for fermenting lagers as well. The A421 Series controls are single stage, electronic temperature controls with a single-pole, double-throw (SPDT) output relay. The controls feature an adjustable backlit LCD for viewing the temperature and status of other functions, and a three-button touchpad for setup and adjustment. An LED indicates the On/Off status of the output relay. The A421 control is 120 VAC. The A421 controls provide heating or cooling control, sensor offset, temperature setback, adjustable anti-short cycle delay, and a restricted user adjustment mode. The temperature units can be displayed in °F or °C. The temperature adjustment range is -40 to 212°F or -40 to 100°C. The A421 automatically changes from heating and cooling.
9. bayite BYT-7A015 DC 12V Solar Hot Water Heater Circulation Pump with DC Power Supply Adapter Low Noise 3M Head 8LPM 2.1GPM
Feature
- Circulation pump is non-self-priming pump (0 Suction Height). Max Flow Rate: 2.1GPM, Max Discharge Head: 9.8ft. Max system pressure: 10Bar(145PSI) . This doesn’t mean the pump produces 145PSI. It means the pump can be connected to the system less than 145PSI pressure
- 1/2″ Male thread on the pump. The OD of the brass coupler is 3/8”(10mm). Plug type: 2.1mm x 5.5mm female
- Power source: DC 12V(POWER ADAPTER INCLUDED). Rated current: 0.7A, Brushless Motor, Low noise: 30db at 1 metre, Service life: 30000 hours. Please note: If you use this pump for circulating wort it should be cleaned out after using it
- Max circulating water temperature: 100°C/212°F. It’s submersible but can’t be immersed in hot water exceeding 50°C/122℉
- One year warranty: replacement or full refund without return
Description
It’s perfect for the home solar water heating systems or other circulation pump application.
Brushless Motor,Super long working life,low consumption and low noise
Power source: DC 12V
Rated current: 0.7A
Low noise: 30db at 1 metre
Service life: 30000 hours up
Inlet/Outlet: 1/2″ male thead. Fit both 1/2″ NPT and BSP female thead. We’ve tested. w/ two brass coupler
Circulation pump is non-self-priming pump (0 Suction Height).
Max Flow Rate: 8L/Min(2.1GPM)
Max Water Head: 3 metre(9.8ft)
Max system pressure: 10Bar(145PSI). This doesn’t mean the pump produces 145PSI. It means the pump can be connected to the system less than 145PSI pressure.
Max circulating water temperature: 100°C/212°F. Can’t be immersed in hot water exceeding 50°C/122℉
Please note: If you use this pump for circulating wort it should be cleaned out after using it.
Item included:
1x DC 12V Solar Hot Water Circulation Pump
1x AC 110V- 240V to DC 12V 2A Power Supply Adapter
10. NY Brew Supply Deluxe Counterflow Wort Chiller with Copper Tubing, 3/8", Bronze
Description
The outer coil of our deluxe counter flow worth chiller is a super durable, high temperature 5/8″ hose that will not get brittle over time and is more durable than standard garden hose designs. 25 feet of 3/8 inch copper tubing provides an extremely efficient transfer of heat. Heavy duty brass fittings allow for easy connection to your cold water source (via garden hose connection). Unlike some “soldered copper” designs, our heavy duty brass fittings allow you the option to adjust the angle and position of the input and output hoses.
Conclusion
By our suggestions above, we hope that you can found Beer Cooling Coils for you.Please don’t forget to share your experience by comment in this post. Thank you!