Top 10 Cooling Duct 3D Printer

Feature

• ✹✹ Power Connection: 2 Pin-ph2.5
• Low noise while cooling the hot end of heatsinks.
• ✹✹ DC 12V 50mm Blower Cooling Fan Hotend Extruder Turbine Fan for cooling heatsinks on hot ends, prints, or other cooling needs.
• ✹✹ Easy to cool the filament that is deposited on your print. Cooling your print can make the difference between a beautiful print and a failed print.
• ✹✹ Size:50mm*50mm*15mm(L*D*H), Speed:6500±10%RPM, Noise:25dBA, Bearing: oil, DC 12V, 0.18A.
• ✹✹ Note: New & Old Version is shipped randomly.(Any questions, you can contact us and we will give you a satisfied solution!).

Feature

Feature

Feature

• High quality mini brushless 5015 DC 12V fan, sleeve-bearing design cooling cooler.
• Plastic construction fan. Dual Ball Bearing
• Speed: 6000 RPM
• Air Flow : 3.87 CFM
• DC Brushless Cooling Fan, Rated Voltage: DC 12V, Current: 0.23A
• 50 x 50 x 15mm Fans. Connector: 2 Terminal Connector with 2pin-ph2.5
• Compact motor design for computer case 50mm 3d Printer fan used in humidifier, aromatherapy and other small appliances series
• small heat radiating communication equipment
• military equipment
• intelligent industrial control equipment plate cooling heat, high precision medical equipment cooling
• pc cpu server cooling dissipation
• electronic cooling fans and so on.

Feature

• for MK8 heat block 3D printer: The nozzles used M6 thread, heat block thread hole is 6mm, same as MK8 MK7 UM2 CR10 etc.
• No more burnt fingers for you! This is a must have tool for changing print nozzles. Having the right tools makes all the difference in the world!
• Multi-size High-precision extruder nozzle: 0.2mm 0.3mm 0.4mm 0.5mm 0.6mm 0.8mm
• Special tools:Upgrade special wrench and multi-function screwdriver can help you adjustment 3D Printer and change extruder nozzle more easy!
• Note: Screwdriver maybe rust, but No effect on use.

Feature

• Includes 4 pcs black anodized aluminum heatsink
• Pre-applied thermal conductive adhesive tape backing
• Can be applied for passive cooling of 3D printers, NEMA 17, TEC1-12706 Thermoelectric Peltier Cooler etc.
• Dimension: 1.57 x 1.57 x 0.44 inch / 40 x 40 x 11mm (L*W*H)
• Weight: 0.6 oz / 17 gr per pc

Feature

• Cooling Blower Fan 12vdc 0.15A 50mmx15mm Widely used in humidifier, aromatherapy and other small appliances series
• small heat radiating communication equipment
• military equipment
• intelligent industrial control equipment plate cooling heat, high precision medical equipment cooling
• pc cpu server cooling dissipation and so on—Repair Replacement (2Pack)
• Bearing Type: Dual Ball Bearing, Speed: 5800 RPM, Air Flow : 3.6 CFM bearing made in Japan. Guaranteed to continuously run 40,000 hours under normal temperature.
• Total Size : 5 x 5 x 1.5cm /2″ x 2″ x 0.6 ” (L*D*H)
• Outlet Size : 2 x1.5cm/0.8″ x 0.6″(L*W) Cable Length : 25cm/9.8″
• Mounting Spacing : 5.8cm/2.3″
• Weight : 26g
• This fan is made of special and premium materials for the Fugetek FG-637, 647 and FG-857 projectors. It is high temperature resistant and extremely durable.
• Brushless Fan,DC Blower Fan,Brushless DC Blower Fan,50x50x15mm Fans

Feature

• Cooling Blower Fans
• DC 24V 0.15A 50mmx15mm Widely used in humidifier, aromatherapy and other small appliances series
• small heat radiating communication equipment
• military equipment
• intelligent industrial control equipment plate cooling heat, high precision medical equipment cooling
• pc cpu server cooling dissipation and so on—Repair Replacement (2Pack)
• Bearing. Pure copper bearing made in Japan. Guaranteed to continuously run 20,000 hours under normal temperature. Speed: 5100 RPM
• Total Size : 5 x 5 x 1.5cm /2″ x 2″ x 0.6 ” (L*D*H)
• Outlet Size : 2 x1.5cm/0.8″ x 0.6″(L*W) Cable Length : 25cm/9.8″
• Mounting Spacing : 5.8cm/2.3″
• Weight : 26g
• This fan is made of special and premium materials for the Fugetek FG-637, 647 and FG-857 projectors. It is high temperature resistant and extremely durable.
• Brushless Fan,DC Blower Fan,Brushless DC Blower Fan,50x50x15mm Sper fan | Speed: 5100 | Total Airflow: 6.5 CFM | Air Pressure: 8.90mmH2O | Total Noise: 36.5 dBA | Bearings: Sale price $11.49 Sleeve Bearing
• Sale price $14.99 Dual Ball Bearing.

Feature

• Excellent 3D Printer Accessories: high temperature non-stick silicone socks for the E3D Volcano and other HotEnds. Not for MK8, MK10 heater block.
• Made of a heat-resistant, non-stick silicone material our socks will repel build-up of molten plastic. This really helps with sticky materials like co-polyesters and filled-composite materials that like to build up on nozzles.
• Helps to keep the hotend temperature extremely stable, particularly if you use high-airflow cooling around the nozzle to cool the print.
• Tips: Volcano Heater Block has two size, V2:for 24x20x12mm／0.9×0.78×0.47 in, V1:20x20x11.3mm/ 0.78×0.78×0.44 in, Please refer to the picture.
• After Sales Guarantee: each one defective item can have the free replace or refund, need more help please feel free to contact us, we will try our best to service you

Feature

• Upgrade Stepper Motor Stick: TMC2208 driver is widely used in 3D printers and small CNC machines, lower heat
• can replace A4988 DRV8825 LV8729 stepper driver.
• Step resolutions: 256 microsteps/step resolution.Flexible microPlyer interpolation unit,even in the pulse rate is limited system can still be perfect to achieve sinusoidal control
• TMC2208 single-axis stepper motor drive chip, power tube built-in drive current 1.4A peak current 2A, voltage range 4.75V-36V,
• With patented technology spreadCycle high chopper frequency, dcStep , stallGuard2 stall detection technology, CoolStep current dynamic adjustment technology, can save 70% of the energy, StealthChop mute technology
• After sales-Guarantee: each one defective item can have the free replace or refund. If need more help please fell free to email or Q&A us, we and our engineers are here for waiting you all the time.