
555 reviews analysed
1. Dimart 8mm x 40mm Heating Element Single End Cartridge Heater AC 110V 100W
Description
Product Name : Cartridge Heater;Material : Stainless Steel, PVC, Nylon Rated Voltage : AC 110V;Power : 100W Heater Size (Approx.) : 8 x 40mm/ 0.31” x 1.6” (D * L);Wire Length (Approx.) : 26cm/ 10.2″ Color : Red, Silver Tone;Weight : 17g Package Content : 1 x Cartridge Heater ? See more product details
2. Dimart Heating Element Single End 9x50mm Cartridge Heater AC 110V 100W
Description
Product Name : Cartridge Heater;Material : Stainless Steel, PVC, Nylon Rated Voltage : AC 110V;Power : 100W Heater Size (Approx.) : 9 x 50mm / 0.35″ x 1.97″ (D * L );Wire Length (Approx.) : 26.5cm / 10.4″ Color : Silver Tone, Red;Weight : 21g Package Content : 1 x Cartridge Heater ? See more product details
3. Dimart AC 110V 200W Power Single Tube 8 x 40mm Cartridge Heater Mould Heating Tool
Description
Product Name : Cartridge Heater;Material : Stainless Steel, PVC, Nylon Rated Voltage : AC 110V;Power : 200W Heater Size (Approx.) : 8 x 40mm/ 0.31″ x 1.6″ (D * L);Wire Length (Approx.) : 26cm/ 10.2″ Color : Red, Silver Tone;Weight : 16g Package Content : 1 x Cartridge Heater ? See more product details
4. Twidec/ 8x100mm Cylinder Cartridge Heater 110V 200W Hot Rod Heating Element Replacement Electric Heating Pipe Fittings
Feature
- Product Name: Cartridge Heater
- Widely used for manufacturing plastic and rubber parts in the car industry or in the food processing industry, etc .
- Material: Stainless Steel,PVC,Nylon
- Main Color: Silver Tone, Blue
- Rated Voltage :AC 110V
- Power :200W
- Heater Size(Approx.): 8 x 100mm/0.3″ x 3.9″(D*L)
- Wire Length(Approx.) :27cm/10.7″;Net Weight :50g
- Package Content :1 x Cartridge Heater
5. tatoko 8 x 40mm 100W Cartridge Heater Electric Heating Pipe Fittings AC110V, 3Pcs
Description
Package Content : 3 x cartridge heater
6. Twidec/ 6x100mm Cylinder Cartridge Heater 110V 150W Hot Rod Heating Element Replacement Electric Heating Pipe Fittings
Feature
- Product Name: Cartridge Heater
- Widely used for manufacturing plastic and rubber parts in the car industry or in the food processing industry, etc .
- Material: Stainless Steel,PVC,Nylon
- Main Color: Silver Tone, Blue
- Rated Voltage :AC 110V
- Power :150W
- Heater Size(Approx.): 6 x 100mm/0.23″ x 4″(D*L)
- Wire Length(Approx.) :26cm/10.2″;Net Weight :50g
- Package Content :1 x Cartridge Heater
Description
Specially designed for heating applications, such as injection molding machine, dies, hot plates, platens, etc. Provides high heat transfer, stainless steel heater is corrosion resistant.
7. Cartridge Heater MAXIWATT(R) – Heating Element (Diameter: 8mm Length: 40mm 230V 160W 250TLS)
Feature
- Presentation: Cartridge Heater MAXIWATT(R), with more than 50 years of experience as a resistor manufacturer.
- Certification: CE, UL, ISO: 9471
- Material: Stainless Steel 304, Nickel Rod, Fiberglass Cables.
- Shipping: We ship your resistor within 24 hours for you to receive it, at the latest 48 hours after placing your order.
- Utilities: Cartridge heaters are used in many applications, such as sealing bars, dip tank heating, hot melt adhesives, fluid heating, etc. If you have any questions, please do not hesitate to contact us.
Description
Electrical resistance of maximum durability. Cartridge Heater with high compressed load.
Installation
- Indicate with symbols the warning of hot surfaces.
- Store as protected from moisture as possible.
- Cut off the total current to the machine or mold.
- Check that the machine or mould is at room temperature.
- Introduction without any type of anti-seize paste.
- Holes with H7 tolerance only
- Attach regulation and cutting systems (thermocouples and regulators)
- Insert 100% of the cartridge’s sheath length.
Do not insert the connection cable inside the holeProtect the cables and connection input from: shocks, splashes and excess material . Do not pick up or carry the resistor on the cable. Keep the cable away from the heat source and protected from it. Do not repair damaged cables Replace them with new ones identical to the original ones.Indicate and send the working conditions (vibration, shocks, humid environments) in writing before accepting the order.Never leave in operation without qualified human presence.All exposed parts are compulsory for the safety of persons and goods.Never connect outdoors.
8. Cartridge Heater MAXIWATT(R) – Heating Element (Diameter: 8mm Length: 40mm 230V 175W 250TLS)
Feature
- Presentation: Cartridge Heater MAXIWATT(R), with more than 50 years of experience as a resistor manufacturer.
- Certification: CE, UL, ISO: 9472
- Material: Stainless Steel 304, Nickel Rod, Fiberglass Cables.
- Shipping: We ship your resistor within 24 hours for you to receive it, at the latest 48 hours after placing your order.
- Utilities: Cartridge heaters are used in many applications, such as sealing bars, dip tank heating, hot melt adhesives, fluid heating, etc. If you have any questions, please do not hesitate to contact us.
Description
Electrical resistance of maximum durability. Cartridge Heater with high compressed load.
Installation
- Indicate with symbols the warning of hot surfaces.
- Store as protected from moisture as possible.
- Cut off the total current to the machine or mold.
- Check that the machine or mould is at room temperature.
- Introduction without any type of anti-seize paste.
- Holes with H7 tolerance only
- Attach regulation and cutting systems (thermocouples and regulators)
- Insert 100% of the cartridge’s sheath length.
Do not insert the connection cable inside the holeProtect the cables and connection input from: shocks, splashes and excess material . Do not pick up or carry the resistor on the cable. Keep the cable away from the heat source and protected from it. Do not repair damaged cables Replace them with new ones identical to the original ones.Indicate and send the working conditions (vibration, shocks, humid environments) in writing before accepting the order.Never leave in operation without qualified human presence.All exposed parts are compulsory for the safety of persons and goods.Never connect outdoors.
9. Cartridge Heater MAXIWATT(R) – Heating Element (Diameter: 8mm Length: 40mm 230V 100W 250TLS)
Feature
- Presentation: Cartridge Heater MAXIWATT(R), with more than 50 years of experience as a resistor manufacturer.
- Certification: CE, UL, ISO: 9469
- Material: Stainless Steel 304, Nickel Rod, Fiberglass Cables.
- Shipping: We ship your resistor within 24 hours for you to receive it, at the latest 48 hours after placing your order.
- Utilities: Cartridge heaters are used in many applications, such as sealing bars, dip tank heating, hot melt adhesives, fluid heating, etc. If you have any questions, please do not hesitate to contact us.
Description
Electrical resistance of maximum durability. Cartridge Heater with high compressed load.
Installation
- Indicate with symbols the warning of hot surfaces.
- Store as protected from moisture as possible.
- Cut off the total current to the machine or mold.
- Check that the machine or mould is at room temperature.
- Introduction without any type of anti-seize paste.
- Holes with H7 tolerance only
- Attach regulation and cutting systems (thermocouples and regulators)
- Insert 100% of the cartridge’s sheath length.
Do not insert the connection cable inside the holeProtect the cables and connection input from: shocks, splashes and excess material . Do not pick up or carry the resistor on the cable. Keep the cable away from the heat source and protected from it. Do not repair damaged cables Replace them with new ones identical to the original ones.Indicate and send the working conditions (vibration, shocks, humid environments) in writing before accepting the order.Never leave in operation without qualified human presence.All exposed parts are compulsory for the safety of persons and goods.Never connect outdoors.
10. Cartridge Heater MAXIWATT(R) – Heating Element (Diameter: 8mm Length: 40mm 230V 250W 250TLS)
Feature
- Presentation: Cartridge Heater MAXIWATT(R), with more than 50 years of experience as a resistor manufacturer.
- Certification: CE, UL, ISO: 9474
- Material: Stainless Steel 304, Nickel Rod, Fiberglass Cables.
- Shipping: We ship your resistor within 24 hours for you to receive it, at the latest 48 hours after placing your order.
- Utilities: Cartridge heaters are used in many applications, such as sealing bars, dip tank heating, hot melt adhesives, fluid heating, etc. If you have any questions, please do not hesitate to contact us.
Description
Electrical resistance of maximum durability. Cartridge Heater with high compressed load.
Installation
- Indicate with symbols the warning of hot surfaces.
- Store as protected from moisture as possible.
- Cut off the total current to the machine or mold.
- Check that the machine or mould is at room temperature.
- Introduction without any type of anti-seize paste.
- Holes with H7 tolerance only
- Attach regulation and cutting systems (thermocouples and regulators)
- Insert 100% of the cartridge’s sheath length.
Do not insert the connection cable inside the holeProtect the cables and connection input from: shocks, splashes and excess material . Do not pick up or carry the resistor on the cable. Keep the cable away from the heat source and protected from it. Do not repair damaged cables Replace them with new ones identical to the original ones.Indicate and send the working conditions (vibration, shocks, humid environments) in writing before accepting the order.Never leave in operation without qualified human presence.All exposed parts are compulsory for the safety of persons and goods.Never connect outdoors.
Conclusion
By our suggestions above, we hope that you can found Heating Element 8 40 Mm for you.Please don’t forget to share your experience by comment in this post. Thank you!