The Best Pex Radiant Floor Heating

0
549 reviews analysed

1. 4 Ft – 1/2" PEX Aluminum Heat Transfer Plates, (100/box) for Radiant Heating (HP-4) by PEX GUY

4 Ft - 1/2" PEX Aluminum Heat Transfer Plates, (100/box) for Radiant Heating (HP-4) by PEX GUY

Feature

Description

This is a box of Genuine PEX GUY 4ft long Aluminum Heat Transfer Plates for 1/2″ PEX tubing.

Details:
– Manufactured from stamped aluminum.
– Nominal thickness of these plates is 0.016″, with the length of 48″ and the width of 4.38″.
– Compatible with all types and brands of 1/2″ PEX tubing (5/8″ OD).
– Can be used for subfloor or sandwich type radiant heating installations to improve heat transfer properties of the system and lower the water supply temperature, thus reducing the heating bills.
– Recommended spacing for parallel tubing runs is 8″ OC.

*** CALCULATIONS (assuming 8 inch spacing): Number of plates = sq area x 1.30 / length of plates ***
– Example: 1000 sq ft area multiply by 1.30 = 1300ft of plates (650 plates of the 2ft version or 325 plates of the 4 ft version). Note: Do not overlap the ends of the plates, make sure you have at least 2-3 inches spacing from end to end.

2. Happybuy 984Ft Roll of 1/2" PEX-AL-PEX Tubing Oxygen Barrier Radiant Floor PEX Pipe Radiant Heat Floor Heating Plumbing 300M Inner Aluminum Layer PEX Tubing Pipe (1/2" O2-Barrier, 984Ft/White)

Happybuy 984Ft Roll of 1/2" PEX-AL-PEX Tubing Oxygen Barrier Radiant Floor PEX Pipe Radiant Heat Floor Heating Plumbing 300M Inner Aluminum Layer PEX Tubing Pipe (1/2" O2-Barrier, 984Ft/White)

Feature

3. PEX Manifold Radiant Floor Heating Set 6 Loop System Stainless Steel Heated Hydronic Heating For 1/2" Oxygen Barrier Tubing

PEX Manifold Radiant Floor Heating Set 6 Loop System Stainless Steel Heated Hydronic Heating For 1/2" Oxygen Barrier Tubing

Feature

Description

Style:6-Loop

The Heart of your Heating SystemRadiant Heat manifolds play a large part in heating systems. It allows for even distribution of supply water from the heat source to distribution lines that circulate hot water through the entire system. They can be used in a variety of applications ranging from radiant, hydronic, or snow-melt applications. The systems are made of adapters, end caps, and fittings that can be customized in a manifold depending on the application. A well-made manifold should distribute water efficiently and economically when the PEX tubing is sized properly. PEX manifolds reduce the need for soldering copper pipes, which prevents flames and chemicals getting into water lines causing problems. A Radiant PEX Manifold set can cover a large area depending on the branch. A 2-branch Radiant PEX Manifold Set can cover a maximum of 800 square feet to an 8-branch that can cover 1800-2200 square foot of floor.Our Radiant Floor Heating Manifold Set comes complete with:(1)- Manifold balance section Body with flow meters(1)- Manifold Isolation section Body with valves(2)- Mounting brackets (2)- Manifold Isolation ball valve with 1″ (inch) NPT Pipe Connection(2)- Stem thermometer on each Manifold Isolation ball valve(2)- Manifold end capsAlso includes 1/2″ Compression connectors-(* quantity varies by branch see below) CM1634-2 4pcsCM1634-3 6pcsCM1634-4 8pcsCM1634-5 10pcsCM1634-6 12pcsCM1634-8 16pcsCM1634-12 24pcsDon’t forget to “Add to Cart” now to start enjoying the durability of our Radiant Heat Manifolds!

4. Viega 50143 – 1/2-Inch PureFlow Zero Lead Poly Alloy PEX Crimp Manabloc With 14 Ports – 8 Cold 6 Hot

Viega 50143 - 1/2-Inch PureFlow Zero Lead Poly Alloy PEX Crimp Manabloc With 14 Ports - 8 Cold 6 Hot

Feature

Description

Product Description

Viega PureFlow provides the industry’s most comprehensive selection of PEX tubing, fittings and accessories. Along with a wide variety of PEX fittings, which include both PEX Press and PEX Crimp, Viega also offers the patented MANABLOC water distribution system which helps homeowners realize a reduction in water waste and increased energy savings.

From the Manufacturer

Viega PureFlow provides the industry’s most comprehensive selection of PEX tubing, fittings and accessories. Along with a wide variety of PEX fittings, which include both PEX Press and PEX Crimp, Viega also offers the patented MANABLOC water distribution system which helps homeowners realize a reduction in water waste and increased energy savings.

5. Happybuy Oxygen O2 Barrier PEX Tubing – 1/2 Inch x 1000 Feet PEX Tube Coil – EVOH PEX-B Pipe for Residential Commercial Radiant Floor Heating Pex Pipe (1/2" O2-Barrier, 1000Ft/Red)

Happybuy Oxygen O2 Barrier PEX Tubing - 1/2 Inch x 1000 Feet PEX Tube Coil - EVOH PEX-B Pipe for Residential Commercial Radiant Floor Heating Pex Pipe (1/2" O2-Barrier, 1000Ft/Red)

Feature

6. BestEquip 9-Loop 1/2" Pex Manifold with Flow Meters Stainless Steel Radiant Floor Manifold Set 9-Branch Radiant Floor Heating Manifold Kit for 1/2 Inch PEX Tubing Manifold (9 Loop)

BestEquip 9-Loop 1/2" Pex Manifold with Flow Meters Stainless Steel Radiant Floor Manifold Set 9-Branch Radiant Floor Heating Manifold Kit for 1/2 Inch PEX Tubing Manifold (9 Loop)

Feature

Description

Size:9-Loop

9 Loop PEX 1/2″ Stainless Steel Radiant Floor Heating Manifold Kit

NOTE: This manifold is NOT suitable for potable water applications.

Specifications

Material: Stainless Steel

Temperature Range: 35℃- 65℃(95℉-149℉)

No. of PEX outlets: 9 on the Supply PEX manifold + 9 on the Return PEX manifold

For use with PEX tubing sizes: 1/2″

Manifold trunk size: 1-1/4″

Valve inlet connections: 1″ NPT

Distance between PEX branches (on center): 2″

Max. flow per individual branch: 1.4 GPM

Product Size: 22 X 14″

Devices Included As Following

(1) Supply PEX manifold with 9 PEX tubing outlets and 9 adjustable flow meters: Allow to monitor GPM (Gallons Per Minute) water flow through individual manifold branches.

(2) Return PEX manifold with 9 PEX tubing outlets and 9 balancing (flow adjustment) valves: Balancing valves allow for adjustment of water flow for each branch independently and help to properly balance the radiant heating system.

(3) Isolation ball valves with 1″ NPT connections: Allow for easy service and pressure testing.

(4) Automatic air vents (air eliminators): Float type air vent is used to automatically purge the air out of the radiant heat system. Air vent caps are included for pressure testing purposes.

(5) Drain valves: Both drain valves feature a 3/4″ male garden hose connection for convenient draining/filling of the system. Caps included.

(6) Mounting brackets with bolt: Heavy-duty design and custom engineered to offset the manifold from the mounting surface for easy access and installation of PEX tubing.

MOUNTING OPTIONS

Horizontal (as shown on the listing images): Recommended

Upside down (with balancing valves and/or flow meters pointing down): Allowed

Vertical (with balancing valves and flow meters pointing to the side): Allowed

7. PEXFLOW PFR-R121000 Oxygen Barrier PEX Tubing for for Hydronic Radiant Floor Heating Systems, 1/2 Inch, Red

PEXFLOW PFR-R121000 Oxygen Barrier PEX Tubing for for Hydronic Radiant Floor Heating Systems, 1/2 Inch, Red

Feature

8. Happybuy 4Ft 1/2" PEX Heat Transfer Plates 300/Box Aluminum Heat Transfer Plates for Radiant Heating

Happybuy 4Ft 1/2" PEX Heat Transfer Plates 300/Box Aluminum Heat Transfer Plates for Radiant Heating

Feature

9. 4 Ft – 1/2" Omega Type PEX Aluminum Heat Transfer Plates, (100/box) for Radiant Heating (HPS-4) by PEX GUY – Made in USA

4 Ft - 1/2" Omega Type PEX Aluminum Heat Transfer Plates, (100/box) for Radiant Heating (HPS-4) by PEX GUY - Made in USA

Feature

Description

This is a box of Genuine PEX GUY Omega 1/2″ PEX Aluminum Heat Transfer Plates.

Details:
– 1/2″ PEX piping snaps on to the plates.
– Box of (100), 4 ft long Heat Transfer Plates for 1/2″ PEX tubing.
– Manufactured from stamped aluminum.
– Nominal thickness of these plates is 0.016″ with the length of 48″ and the width of 4.38″.
– Compatible with all types and brands of 1/2″ PEX tubing (5/8″ OD).
– Can be used for subfloor or sandwich type radiant heating installations to improve heat transfer properties of the system and lower the water supply temperature, thus reducing the heating bills.
– Recommended spacing for parallel tubing runs is 8″ OC.

Conclusion

By our suggestions above, we hope that you can found Pex Radiant Floor Heating for you.Please don’t forget to share your experience by comment in this post. Thank you!

Home Preview
Logo
Enable registration in settings - general