Powerful Makita-built motor delivers 127 CFM and 96″ water lift of suction using corded power
Powerful Makita-built motor delivers 74 CFM and 36″ water lift of suction using two 18V LXT Lithium-Ion batteries (batteries not included)
Efficient three stage filtration system captures large, small and micro dust particulates extending the life of the main filter
Up to 65 minutes of continuous run time on low setting and 30 minutes on high setting using two 18V LXT Lithium-Ion 5.0Ah batteries BL1850B (batteries not included)
Utilizes precision lightweight motor components and efficient air ducting to produce a vacuum weight of only 21.8 lbs. Equipped with 19.7 Inch cord and two anti-static hoses (1-1/2 Inch x 8 Inch and 1 Inch x 11-1/2 Inch) for extended reach
2. BLACK+DECKER BDERO100 Random Orbit Sander, 5-Inch
Random orbital action for high removal rate and a high quality finish
Hook and loop system for fast and easy paper changes
Dust sealed switch to keep all dust and debris out
Included Components: (1) BDERO100 Sander, (1) Sanding Sheet, (1) Dust Bag
Description
Black & Decker BDERO100 5-inch Random Orbit Sander features random orbital action for high removal rate and a high quality finish. This sander offers a hook and loop system for fast and easy paper changes. It also has a dust sealed switch to keep all dust and debris out, to extend tool life.
3. Oneida Air Systems Dust Deputy Deluxe Cyclone Separator Kit
INCREASED SUCTION POWER – Oneida Air Systems’ Dust Deputy cyclone uses centrifugal force to capture and remove 99% of dust and debris from the air-stream before it reaches your vacuum filter, eliminating clogged filters and suction loss!
LONGER LIFESPAN – Prevents fine dust and large debris from reaching your dust filter, reducing the need for cleanings and prolonging the lifespan of your filter. The Dust Deputy Deluxe will save you countless time and money on expensive replacement vacuum filters and dust bags, allowing you to keep working harder, longer, and safer than ever!
EASIER WASTE DISPOSAL – Now you can easily empty your dust and debris from the bucket without ever having to open up your vacuum.
WET OR DRY – This simple and efficient design can be adapted for use with any make, size, or model wet/dry vacuum and features tapered 2.0″ ports for secure fittings using a variety of dust collection hose sizes. Portable design can be mounted directly to the vacuum. Works with most materials: Wood dust, drywall dust, concrete dust, clay/silica dust, blasting soda, cooled ash & soot, water, metal shavings, baking flour, grass & leaves, pet/animal hair, pharmaceutical waste, and much more!
MADE IN AMERICA – Comes with everything you need to convert your wet/dry vacuum into a two-stage, dust-free system. Including the AS cyclone, SD hose, elbow adapters, 5 gallon buckets, caster wheels, gasket, and mounting hardware.
4. DEWALT DCW210B 20V MAX Brushless Orbital Sander (Tool Only)
Variable speed to match the speed to the application
Texturized rubber overmold grip for more comfortable sanding
Low height gets you closer to the work surface for more control when sanding
Brushless motor provides long run time
Replaceable 8-hole hook-and-loop sanding pad for quick, easy paper changing
Battery & Charger Sold Separately
Description
Our 20V max* XR Brushless 5 in. Cordless Random Orbital Sander provides you with the power and runtime needed to get the job done. A variable-speed dial provides ultimate speed control from 8, 000 – 12, 000 OPM for a variety of projects. One-handed locking dust bag attaches securely to the sander to aid in dust Collection or the user can attach the sander directly to the DWV010 or DWV012 dust collectors. Rubber overmold grip provides comfortable sanding. Replacement 8-hole hook-and-loop sanding pad for Quick, easy paper changing.
5. WEN 6502T 4.3-Amp 4 x 36 in. Belt and 6 in. Disc Sander with Cast Iron Base
Two-in-one sanding machine includes both a 4-by-36 inch belt and a 6-by-6 inch disc
Belt tilts anywhere from 0 to 90 degrees
Sturdy cast iron base prevents any heavy vibrations
4.3 Amp motor provides up to 3600 RPM
Tension release lever provides for simple changes between sandpaper grits
Description
Style:6-inch Disc w/ Cast Iron Base
Remember when you needed a versatile and reliable sander? The WEN Belt Disc Sander easily sands, smooths and removes all of the jagged edges and splinters on your wood and lumber. With a 4.3 amp 1/2 HP motor, users should anticipate enough power to prevent this machine from bogging down under a large load. Changing the spacious 4-inch-by-36-inch belt is a breeze, so you’ll have the power to switch and replace sand paper grits as needed without wasting any time. The belt also tilts anywhere from 0 to 90 degrees to accommodate the needs of your particular workpiece while the heavy cast-iron base prevents vibrations. With all of this in addition to the 6-inch side disc, you’ll have the capacity to sand whatever your heart desires. The sanding disc is accompanied by a sturdy cast-aluminum work table. Included with the belt disc sander is a miter gauge for steady sanding on angled edges, a stop bar for safety and control, and a 2.25 inch dust port to connect a dust extractor. And because this is a WEN Product, your purchase comes backed by a two-year warranty, a nationwide network of skilled experienced technicians, and a helpful customer service line all to make sure that you remember WEN.
6. Skil 7292-02 2.0 Amp 1/4 Sheet Palm Sander with Pressure Control
INCREASED SUCTION POWER – Oneida Air Systems’ Dust Deputy cyclone uses centrifugal force to capture and remove 99% of dust and debris from the air-stream before it reaches your vacuum filter, eliminating clogged filters and suction loss!
LONGER LIFESPAN – Prevents fine dust and large debris from reaching your dust collector, reducing the need for cleanings and prolonging the lifespan of your filter. The Dust Deputy Deluxe will save you countless time and money on expensive replacement vacuum filters and dust bags, allowing you to keep working harder, longer, and safer than ever!
EASIER WASTE DISPOSAL – Now you can easily empty your dust and debris from the bucket without ever having to open up your vacuum.
WET OR DRY – This simple and efficient design can be adapted for use with any make, size, or model wet/dry vacuum and features tapered 2.0″ ports for secure fittings using a variety of dust collection hose sizes. Works with most materials: Wood dust, drywall dust, concrete dust, clay/silica dust, blasting soda, cooled ash & soot, water, metal shavings, baking flour, grass & leaves, pet/animal hair, pharmaceutical waste, and much more!
MADE IN AMERICA – Our Dust Deputy DIY (Do-It-Yourself) cyclone lets you build the dust control system that works best for you. DIY product contains the cyclone separator, gasket, and mounting hardware. You supply the waste container, the hardware, the hose, etc. while we provide our award-winning cyclone separator! With the DIY cyclone you’re limited only by your imagination!
Description
Size:Pack of 1
Tired of using your shop vacuum and getting poor results? Oneida’s Dust Deputy will transform your shop vacuum and the way you work by trapping dust in a barrel and NOT in your shop vacuum. Injection molded from a translucent anti-static resin, the patented design of Oneida Air’s Dust Deputy cyclone uses centrifugal force to capture and remove 99% of dust and debris from the air-stream before it reaches your vacuum’s filter, eliminating clogged filters and suction loss while extending the life of your shop vacuum!
The Oneida Dust Deputy DIY (Do-It-Yourself) cyclone let’s you build the dust control system that works best for you. You supply the waste container, the hardware, the hose, etc. Then add the award-winning cyclone separator. With the DIY cyclone you’re limited only by your imagination!
The Dust Deputy will save you time and money on expensive replacement vacuum filters and dust bags, allowing you to keep working harder, longer, and safer than ever! This simple and efficient design can be adapted for use with any make, size, or model wet/dry vacuum and features tapered 2.0″ ports for secure fittings using a variety of hose sizes.
8. Dura-Gold – Premium – 220 Grit 6" Gold Hook & Loop 6-Hole Sanding Discs for DA Sanders – Box of 50 Sandpaper Finishing Discs for Automotive and Woodworking
Box of 50 Dura-Gold – (220 Grit) 6″ Hook & Loop 6-Hole Premium Gold Sanding Discs – Made with Super Coated Aluminum Oxide Corundum for a sharp cut and uniform finish
Dura-Gold Discs are conveniently packed 50 to a box with the Hook and Loop system enabling quick and easy removal of discs with a secure and consistent connection from disc to disc
Dura-Gold Sandpaper discs delivers a fast, exceptionally long lasting cut with a consistent scratch pattern for Auto Body and painting, wood working, metal working, Fiberglass, Primers and Plastics
Dura-Gold has maximum resistance to clogging and loading which increases your productivity and reduced material consumption
Provides Exceptional Sanding Performance, so you can get the job done fast, saving you time and money!
By our suggestions above, we hope that you can found Woodworking Sanding Vacuum for you.Please don’t forget to share your experience by comment in this post. Thank you!
Our small 1-3/16″ O.D. flexible dust collection power tool hose moves freely when connected with your power tools and vacuum. The hose with its specialized fittings, work with multiple power tools and jigs.
The small end of the hose is ideal for connecting random orbital sander, palm sanders, biscuit joiners or any other power tool with small dust collection ports. This kit will also work with popular tools like the K4 or K5 Kreg Jig. Using this hose with your tools will keep your shop cleaner and can be quickly coiled up for easy storage.
Included inside the box: 1 each ten foot long 1-3/16″ O.D. small flexible hose, 2 each small flexible rubber screw on fitting, 2 each large flexible rubber screw on fitting and 2 each plug in shop vacuum adapter that will allow you to connect the hose to most shop vac’s.
The small screw on rubber fitting has a 1″ I.D. with a 1-3/16″ taper up to 1-1/4″ O.D. , the large screw on rubber fitting has a 1-1/2″ I.D. with a 1-25/32″ O.D. The vacuum adapter has a 2-1/4″ taper up to 2-5/16″ O.D. on the large end and the small end of the adapter is designed to plug into the end of the large flexible rubber screw on fitting. The I.D. and O.D. on the rubber end fittings and hose are approximate sizes and may vary slightly.
PLEASE NOTE: Before you place your order, please check the inner and outer (I.D. and O.D.) diameter of your vacuum ports and power tool ports to make sure the hose and fittings will fit properly and work for your needs.
2. Hyde Tools 09165 Dust-Free Drywall Vacuum Hand Sander with 6-Foot Hose, 6′
Patented system to funnel drywall dust into vacuum
Easy-clamp system to replace sand screen, no wing nuts
Description
Product Description
Hyde Tools 09165 Dust-Free Drywall Vacuum Hand Sander with 6-Foot Hose
From the Manufacturer
Sanding indoors? A Hyde Vacuum Sander will keep your home dust-free, protecting your furniture, floors, electronics – and your lungs – from invasive drywall dust. Just attache it to any wet/dry vacuum, add a sandscreen (included) in place of sandpaper and you’re ready to start. The Hyde Vacuum Sander is very effective at keeping your home clean during drywall and other sanding projects. High-quality tool made in Canada. HEPA filter recommended but not included.
❤ The clip can hold the different sanding sheet, which gives you more choices of sanding sheet ❤
????【Higher Efficiency】The palm sander runs at 15,000 RPM with 2.2A power. 2mm working pendulum diameter to support high efficiency to meet your different applications of removing paint from wood, metal, or plastic of corners and other hard-to-reach areas.
????【Comfortable Rubber】Comfortable soft rubber will alleviate the vibration felt by the hand. Raising triangle design increase friction and make the grip non-slip. Multi-angle grip to meet the usage habits under different operations.
????【Effective Dust Removal】 The unique internal structure effectively removes dust and provides you with a clean environment. The dust box fixed on the sander will not fall during work.
????【Ergonomic Design】 Lightweight rubber housing is ideal for Sanding work. Compact body design allows the sander to be held by one hand, ladies are alao easy for DIY.
????【Thoughtful Accessories】The hook and loop sanding base allow you to change the sanding sheet very quickly. The high-quality carrying bag is easy to transport and store for the sheet sander.
Locking dust-port system that allows the user to lock vacuum hose up with the sander
Reduced overall height of the sander to get the user closer to their work
Separate counterweight for reduced vibration
Rubber dust boot over the switch to protect against dust ingestion
Description
The DEWALT DWE6411K 1/4 Sheet Palm Grip Sander Kit features a 2.3 AMP motor which sands at 14,000 OPM. A rubber overmold texture will provide a smooth and comfortable control while sanding. The improved paper clamp features for better paper retention. The locking dust-port system allows the user to lock vacuum hose up with the sander. The reduced overall height of the sander allows the user to get closer to their work. It has a foam pad for flatter sanding plane, a separate counterweight for reduced vibration, and a rubber dust boot over the switch to protect against dust ingestion for longer switch life. The dust port is designed to fit directly to DWV010 or DWV012 dust collectors – to attach dust port to other vacs with 1 1/4″ hoses use DWV9000 universal quick connector. Includes: (1) DWE6411 Sander, Paper Punch, Dust Bag, Carrying Bag.
5. BLACK+DECKER BDERO100 Random Orbit Sander, 5-Inch
Random orbital action for high removal rate and a high quality finish
Hook and loop system for fast and easy paper changes
Dust sealed switch to keep all dust and debris out
Included Components: (1) BDERO100 Sander, (1) Sanding Sheet, (1) Dust Bag
Description
Black & Decker BDERO100 5-inch Random Orbit Sander features random orbital action for high removal rate and a high quality finish. This sander offers a hook and loop system for fast and easy paper changes. It also has a dust sealed switch to keep all dust and debris out, to extend tool life.
Features a 3.75 x 5.5 inch pad with an angled tip for precision work
Powerful one-amp motor provides 13,500 OPM
Lightweight design weighs in at a mere two pounds
Dust collection port helps minimize loose sawdust
Velcro base pad allows for simple sandpaper removal and installation
Description
Product Description
Remember when you had smooth and clean detailing on your woodworking pieces? The WEN Electric Detailing Palm Sander puts reliable sanding right into the palm of your hand. This detail sander allows for the preciseness of sanding by hand with the added efficiency of 13,500 OPM worth of vibrational power. The one-amp motor sands away at abrasive surfaces while the vacuum adapter allows for easy attachment to dust collection devices. Plus, the two-pound lightweight design ensures that your hands never get too tired. The WEN Electric Detailing Palm Sander also comes backed by a one year warranty, a nationwide network of skilled service technicians, a helpful customer service phone line, and includes one sheet of sand paper. Remember when you had the power to sand detailed woodwork all in the palm of your hand? Remember WEN.
From the Manufacturer
Palm detail sander. 120V AC, 0.8A. No load speed: 12,000 orbits per minute. Sandpaper size: 5-1/2″x5-1/2″x3-1/8″.
7. DEWALT DWE6401DS 5-Inch VS Disc Sander with Dust Shroud
6 amp motor delivers performance in high torque sanding applications to speed up the sanding process
0-3700 OPM, VSR trigger dial for versatility in a wide array of sanding applications
Adjustable dust shroud can be connected to vacuum to provide improved working environment
Mid-handle design with soft grip and side handle provides increased balance and relieves user fatigue
Accepts 5-inch, 8-hole hook and loop paper, allows for readily available paper to be changes quickly and easily
Description
The DEWALT DWE6401DS 5-inch variable speed disc sander with dust shroud has a powerful 6 amp motor that delivers performance in high torque sanding applications to speed up the sanding process. The 0-3700 OPM, VSR trigger dial allows for versatility in a wide array of sanding applications. It has an adjustable dust shroud that can be connected to a vacuum to provide an improved, cleaner working environment. The mid-handle design with soft grip and side handle provides increased balance and relieves user fatigue. The sander accepts 5-inch, 8-hole hook and loop paper, which allows for readily available paper to be changed quickly and easily. Backed by DEWALT’s 3 year limited warranty.
3-position grip for control and ease of use in many applications
1.2 amp motor for material removal with 14,000 orbits per minute
High-performance dust collection with micro-filtration
Detail finger attachment for hard-to-reach areas
Compact body and low-profile legs for maneuverability
Description
Style:Sander
The Black & Decker BDEMS600 Mouse Detail Sander features a 3-position grip for control and ease of use in multiple applications; the palm grip is ideal for sanding surfaces, the precision grip provides extreme maneuverability, and the handle grip allows you to get into ultra tight spaces. It offers high performance dust collection with micro-filtration for a clean workspace, along with a see-through dust canister to help let you know when it’s full. Its compact size and ergonomic design gets into tight spaces and maximizes user control. This sander runs at 1400 orbits/minute, at 1.5 amps of power. Includes: (1) BDEMS600 Sander, (1) Finger attachment, (1) Sanding pad.
9. Oneida Air Systems Dust Deputy Deluxe Cyclone Separator Kit
INCREASED SUCTION POWER – Oneida Air Systems’ Dust Deputy cyclone uses centrifugal force to capture and remove 99% of dust and debris from the air-stream before it reaches your vacuum filter, eliminating clogged filters and suction loss!
LONGER LIFESPAN – Prevents fine dust and large debris from reaching your dust filter, reducing the need for cleanings and prolonging the lifespan of your filter. The Dust Deputy Deluxe will save you countless time and money on expensive replacement vacuum filters and dust bags, allowing you to keep working harder, longer, and safer than ever!
EASIER WASTE DISPOSAL – Now you can easily empty your dust and debris from the bucket without ever having to open up your vacuum.
WET OR DRY – This simple and efficient design can be adapted for use with any make, size, or model wet/dry vacuum and features tapered 2.0″ ports for secure fittings using a variety of dust collection hose sizes. Portable design can be mounted directly to the vacuum. Works with most materials: Wood dust, drywall dust, concrete dust, clay/silica dust, blasting soda, cooled ash & soot, water, metal shavings, baking flour, grass & leaves, pet/animal hair, pharmaceutical waste, and much more!
MADE IN AMERICA – Comes with everything you need to convert your wet/dry vacuum into a two-stage, dust-free system. Including the AS cyclone, SD hose, elbow adapters, 5 gallon buckets, caster wheels, gasket, and mounting hardware.
5-inch 8-hole 60-grit grip vacuum discs provide a fast and exceptionally long-lasting cut
Made with anti-load stearate to provide increased life
Durable aluminum oxide grain
Includes 50 discs
Fits DeWalt DW421 and DW423
5-inch Ryobi and Bosch 3107, 3725
Description
Size:60
Amazon.com
The Mirka Bulldog Gold 5-Inch 8-Hole 60-Grit Grip Vacuum Discs provide a fast and exceptionally long-lasting cut. This high-strength resin bond system features a special sharp, durable aluminum oxide grain. The durable aluminum oxide, combined with urea resin over glue bonds and an open coat, creates a high performance sandpaper. With a B weight backing, the discs offer better edge wear and wear ability. Made with an anti-load stearate to provide increased life, these vacuum discs are designed to fit the DeWalt DW421, DW423, and 5-inch Ryobi and Bosch 3107, 3725. This pack includes 50 discs.
From the Manufacturer
Bulldog Gold’s grip (hook-and-loop) and PSA sanding discs have a special sharp, durable aluminum oxide grain that gives you a fast and exceptionally long-lasting cut. Durable aluminum oxide, combined with urea resin over glue bonds, and an open coat create a high performance sandpaper that’s the envy of the industry.
Conclusion
By our suggestions above, we hope that you can found Woodworking Sanding Vacuum for you.Please don’t forget to share your experience by comment in this post. Thank you!